Thermal Module Operation

Charging

• Charge the thermal module using the USB-C to USB-A cable and a 5V 1A power source.
• The indicator LED will blink while charging.
• The thermal module will be fully charged in approximately 1 hour and the indicator LED will be on continuously.
• The current battery charge percentage is shown in the top right corner of the menu view during scanning.

Power

• Push the power button to turn the thermal module on. The indicator LED will flash green when it is ready.
• The thermal module will automatically go to sleep after 2 minutes of inactivity.
• Push and hold the power button for at least 2 seconds to turn the thermal module off.