Quick Start Guide
Charge
Charge the thermal module using the USB-C to USB-A cable and a 1A power source. The indicator LED will blink while charging. The module will be fully charged in approximately 1 hour and the indicator LED will be on continuously.
Power On
Turn the thermal module on by pressing the power button. The power LED will flash green when ready.
Connect
Attach the thermal module to the back of the iPhone using MagSafe and plug the Lightning cable into the iPhone port.
Scan
Unlock the iPhone and open the Q Sense app.
Finish
After scanning, push and hold the power button for 2 seconds to turn the thermal module off.
Warnings
- Do not attempt to open the thermal module.
- The iPhone is water resistant with a rating of IP68. The thermal module is not water resistant.
- Do not use the thermal module while it is charging.
- Avoid aggressive cleaning that may damage the anti-reflective coating on the thermal module lenses. Follow the cleaning instructions.